Maintenance and Care Tips for Your Smok Pen Starter Kit
The Smok Pen is a new type of pen which allows you to write in some recoverable format that is heated right before you write. It is the sort of device that some students would want to have, as it eliminates the need for them to carry a whole tube of special writing ink. You merely fill the reservoir with the normal ink and place your pen in the machine and write on any smooth surface you want.
The Smok pen consists of two major components: the pen body, which is of course where you hold it in place, and the Smok Valve which serve as the connector for the USB charging port. Both parts are encased in a metal and plastic tube referred to as the Smok Valve, that is opened with a valve control found at the bottom of the pen. One end of this tube results in the cigarette lighter socket while the other results in the USB charging port. On the front side of the Smok Valve there exists a dome with a lip that holds the heating element.
Once the pen is charged, it really is heated up by the USB power port and begins to create heat. This heat melts the glue which holds the Smok Valve together, causing it to expand until it leaks out onto the paper or anything you are writing on. Once the ink is successfully charged, the Smok Valve automatically closes, leaving you with a completely functional pen. The surface of the pen includes a transparent dome with a lip around it. The two edges of the dome have a metallic texture in their mind, which when heated causes the ink to spread into a fine powder that may easily be sucked into the writing medium.
When you first remove your Smok Pen, you will observe that it looks just like any other pen. It has a fine point that wont smudge or bleed if you are writing on Juul Compatible Pods paper. It also includes a beautiful metallic shine to it, gives the device a futuristic look. However, this does not mean that the device can’t be used in a typical manner, as there are a number of different ways where you can still benefit from the great benefits of the pen.
A proven way is to heat the machine using your hand, which is how most people enjoy their pens. If you are using the device in this fashion, you need to make sure that you usually do not touch the heating coil heads directly. Instead, you should warm the entire pen to create out their warmth. It is important to remove the battery ahead of this task, as some manufacturers specify a particular temperature to activate the coil heads. There are many different e-liquids in the marketplace that can help you achieve this heat change quickly and easily, ensuring that you never come across issues while warming the pen.
You may find that after heating up the device that it does not work correctly. This normally implies that you are either holding the pen incorrectly, are pressing the heating coil too much, or are holding these devices at a position which is not conducive to warming. If this is the case, then you should take away the batteries and put these devices back together again. It is strongly recommended that you do this each time you start enjoying your Smok Pen starter kit – if you wish to keep the device for longer than this then you can certainly simply repeat the process and soon you have everything sorted.
When testing your starter kit to ensure everything is working correctly, you need to check out the connections to the tank and the coil head. Ideally, the connections on the tank ought to be securely tightened – if they are loose then they should be tightened to the manufacturer’s specifications. If you feel that this has not been done correctly, then it may be worthwhile getting the entire tank re-tightened by a professional as many devices like they are manufactured to an extremely high standard. If this isn’t the case, then your only way to make sure that everything is working properly would be to have the complete tank re-tied.
The next phase in the battery care process is to charge your show pen. This can usually be done through the USB port of one’s computer. Once charged, the device ought to be ready for use. After you have completed this step, you should leave the device connected to a power supply. You need to check regularly that the coils are charged up, and you should leave the device to charge for the recommended time period – typically around 5 hours.